Products

LUCK Carpet makes this polypropylene tufted wall to wall carpet at our 26,000 m² plant in Foshan, Guangdong, for exhibition halls that lay a floor and strike it inside one shift. The build is a 4 mm loop pile at 500 g/m2 on an anti-slip textile backing, cut to 4 m (13.1 ft) usable width, so a 40 m aisle run needs ten drops and nine seams. Fourteen years of exporting fair flooring showed us what fails in a hall: curling edges, drifting seams and a lift that overruns the move-out deadline. This page covers install speed and seam discipline on short show cycles.

LUCK Carpet manufactures this nylon tufted wall to wall carpet in Foshan, Guangdong. It is a 100 % nylon cut pile, 6 mm at 800 g/m2, on an anti-slip textile backing and supplied in a 4 m usable width. Corridors are the application: hotel guest floors, hospital routes, student housing, office link ways. Each one is a long narrow room where the whole floor is a walkway and every wall is shared with somebody.

LUCK Carpet is a Foshan manufacturer of nylon tufted wall to wall carpet, and this construction is the one we sell most often to hospitality groups. The face is 100 % nylon cut pile, 6 mm at 800 g/m2, on an anti-slip textile backing in a 4 m usable width. It goes into hotels, serviced apartments, restaurants and members clubs, where guests see the front of the house and staff see the back. Wear levelling is the subject of this page.

LUCK Carpet produces this nylon tufted wall to wall carpet in Foshan, Guangdong, on cut pile tufting lines we own and run. The face is 100 % nylon, 6 mm at 800 g/m2, on an anti-slip textile backing in a 4 m usable width. It is specified for hotel lobbies and arrival halls, where hard paving meets a soft floor and every guest drags a wheeled case across the join. Compression recovery at that junction is what this page is about.

LUCK Carpet manufactures this nylon tufted wall to wall carpet in Foshan, Guangdong, on cut pile tufting lines we own and run. The face is 100 % nylon at 8 mm pile height on an anti-slip textile backing, built for hotel guest floors, lift lobbies and public corridors. Whether such a carpet is still flat and still one colour in year six depends on two decisions: whether the yarn can be traced back to its polymer batch, and whether the backing suits the climate of the building.

LUCK Carpet makes this wool printed wall to wall carpet for hotel guest areas at our 26,000 m2 plant in Foshan, Guangdong, where 180 staff and 14 years of export production sit behind every roll. The construction is an 80/20 wool-nylon blend in a 10 mm cut pile at 1,200 g/m2 on an anti-slip textile backing, printed from the hotel's own artwork at a 4 m usable width and classified Bfl-s1 to EN 13501-1. Hoteliers buy it for corridors, rooms and suites, where guests judge the floor with their ears as much as their eyes.